Removal
| 1. | See Figure 1. Remove fairing. a. Pull fairing (1) forward to release mounting studs (2) from grommets (3). b. Remove fairing. |
Installation
| 1. | Inspect fairing. NOTE If damage or wear is noticed, see a Harley-Davidson dealer. a. Check mounting studs and grommets for damage. | |
| 2. | Install fairing. a. Place fairing over headlamp and align mounting studs and grommets. b. Push fairing straight back until fully seated. c. Verify the mounting studs are properly seated and fairing is secure. |
| 1 | Fairing |
| 2 | Stud (3) |
| 3 | Grommet (3) |
Figure 1. Fairing