1. Check the amount of fuel in the tank. Add fuel if required. See Before Riding → Filling the Fuel Tank.
2. Adjust mirrors to proper riding positions. See Before Riding → Adjusting Mirrors.
3. Check the engine oil level. See Maintenance and Lubrication → Check Engine Oil Level.
4. Check brake fluid level. See Maintenance and Lubrication → Checking Brake Fluid Level and Changing Brake Fluid.
5. Inspect brake pads and discs for wear. See Maintenance and Lubrication → Inspecting Brake Pads and Discs.
6. Check the hand and foot controls to be sure they are operating properly. Operate the front and rear brakes, throttle, clutch and shifter. See Operation.
7. Inspect brake lines for wear or damage.
8. Check steering for smoothness by turning the handlebar through the full operating range.
WARNING
Be sure tires are properly inflated, balanced, undamaged, and have adequate tread. Inspect your tires regularly and see a Harley-Davidson dealer for replacements. Riding with excessively worn, unbalanced, improperly inflated, overloaded or damaged tires can lead to tire failure and adversely affect stability and handling, which could result in death or serious injury. (00014b)
9. Check tire condition, pressure and motorcycle loading. Refer to Before Riding → Checking Tire Pressure and Inspecting Tires for correct tire inflation pressure and motorcycle weight allowances.
10. Check rear shock settings. Adjust if necessary. See Before Riding → Adjusting Shock Absorbers.
11. Check for any fuel, oil or hydraulic fluid leaks.
12. Check drive belt for wear or damage.
WARNING
Be sure headlamp, tail and stop lamp and turn signals are operating properly before riding. Poor visibility of rider to other motorists can result in death or serious injury. (00478b)
13. Check all electrical equipment and switches including the stop lamp, turn signals and horn for proper operation.
14. Service your motorcycle as necessary.