1 | 7.6 meters (25 feet) |
2 | 0.9 meters (35 inches) |
1. | See Figure 3. Remove snap plug on top of headlamp housing. | |
2. | See Figure 4. Loosen adjusting nut on top of headlamp. | |
3. | Tighten headlamp mounting nut to 13.6–20.3 N·m (120–180 in-lbs) being careful not to move the headlamp in the process. Check alignment and reinstall snap plug. |
1. | See Figure 5. Loosen horizontal adjusting bolt (2) to adjust headlamp beam side to side. Tighten bolt to 33.9–40.7 N·m (25–30 ft-lbs). | |
2. | Loosen nut on vertical adjusting bolt (1) to adjust headlamp beam up or down. Tighten bolt to 33.9–40.7 N·m (25–30 ft-lbs). |
1 | Vertical adjusting bolt |
2 | Horizontal adjusting bolt |