Special Tools
DescriptionPart NumberQty.
AIR SUSPENSION PUMP AND GAUGE
HD-34633
1

The motorcycle has air-adjustable rear suspension. Adjust air pressure in the rear shock absorbers to suit load requirements, riding style and personal comfort.
NOTICE
Do not exceed maximum air pressure for suspension. Air components fill rapidly. Therefore, use low air line pressure. Failure to do so can result in possible damage to components. (00165b)
WARNING
Use caution when bleeding air from the suspension. Moisture combined with lubricant may leak onto the rear wheel, tire and/or brake components and adversely affect traction, which could result in death or serious injury. (00084a)
  1. Remove the left saddlebag. See Controls and Indicators → SADDLEBAGS.
  2. See Figure 1. Remove the cap from the air valve located behind the shock absorber on the left side of the vehicle.
    3. NOTE
    • Always add 21–35 kPa (3–5 psi) to the existing pressure before releasing air from the system to prevent oil for exiting the air valve. NEVER exceed 345 kPa (50 psi).
    • Do not exceed maximum GVWR or GAWR.
  3. See Figure 2. Attach AIR SUSPENSION PUMP AND GAUGE (Part Number:HD-34633) to the air valve. Fill or release air from the shock absorber to the pressure specified for your model motorcycle and load. Refer to Table 1.
    4. NOTE
    The specified pressures are recommended starting points. Adjust pressure to suit load conditions, riding style and comfort desired. Less pressure does not necessarily result in a softer ride. Using pressures outside the recommended loading range will result in a reduction of available suspension travel and reduced rider comfort.
  4. Install cap on air valve and install left saddlebag.
Figure 1. Rear Suspension Air Valve
Figure 2. Air Suspension Pump and Gauge (HD-34633)
Table 1. Recommended Pressures for Air Suspension Adjustments: Police Models
SHOCK LOAD
TOTAL WEIGHT
PRESSURE
PSI
kPa
Solo rider
up to 68 kg (150 lb)
0
0
68–91 kg (150–200 lb)
0-10
0-69
91–113 kg (200–250 lb)
10-20
69-138
113–136 kg (250–300 lb)
20-30
138-206
136 kg (300 lb) to maximum added weight allowed*
30-50
206-345
Solo rider with full rated police cargo
up to 68 kg (150 lb)
10-20
69-138
68–91 kg (150–200 lb)
20-30
138-206
91–113 kg (200–250 lb)
30-40
206-276
113–136 kg (250–300 lb)
40-50
276-345
136 kg (300 lb) to maximum added weight allowed*
50
345
Maximum loaded vehicle
Maximum added weight allowed*
50
345
If P&A Tour-Pak is installed, add 69 kPa (10 psi) to shock pressure.
Do not exceed 345 kPa (50 psi) rear shock pressure.
*Refer to Specifications → Specifications → Weights for maximum added weight allowed on the motorcycle.