Unlocking/Unlatching
  1. See Figure 1. Standing on left side of vehicle, press down on rear of seat and pull retaining pin from hole in support post.
  2. Dislodge seat from support post.
NOTE
Rear of seat will only move up slightly. If seat must be removed, remove the bolt and nut from the front seat pivot. When installing the bolt, tighten the nut to 5.4–9.5 N·m (48–84 in-lbs).
Locking
  1. Move seat down until support post engages hole in rear seat bracket.
  2. See Figure 1. While pressing down on rear of seat, insert retaining pin in hole of support post.
1Retaining pin
2Rear seat bracket
3Support post
Figure 1. Seat Latch: Police Models