NOTE
Headlamp adjustment can be performed without removing the headlamp trim ring.
  1. See Figure 1. Using adjuster slots in trim ring, insert Phillips screwdriver between headlamp trim ring and rubber gasket.
    1. Horizontal: Turn the horizontal adjusting screw to adjust light beam left and right.
    2. Vertical: Turn the vertical adjusting screw to adjust light beam up and down.
  2. Adjust the light beam until it is centered as shown in Maintenance and Lubrication → Headlamp Alignment → Check Headlamp Alignment.
1Horizontal adjuster
2Vertical adjuster
Figure 1. Headlamp Adjusters (typical)