A trail is a specific path which is recorded during your ride. While the trail is recording, the system stores ongoing location points along the ride. This is different than saving a destination or ride, which only store a number of locations rather than a specified path.
A trail can be used to repeat the ride along the same path in the future or to route back to the start of the trail using the same path.
A trail can be recorded at any time. A route does not need to be active to begin recording a trail.
The maximum amount of Trails the radio can record is 20. When the number of Trails is at capacity, the Start Recording icon will be enabled and following message is displayed Maximum number of trails reached. Please delete a trail first..
Record a Trail
| 1. | Navigate: Home > Navigation. | |
| 2. | Select: Search. | |
| 3. | Select: Trails. | |
| 4. | Select: Start recording. The trail begins recording. | |
| 5. | NOTE Turning off the vehicle does not stop recording a trail. Recording needs to be stopped manually in order for a trail file to be created. | |
Rename a Trail
| 1. | Navigate: Home > Navigation. | |
| 2. | Select: Search. | |
| 3. | Select: Trails. | |
| 4. | Select: Trail from list. | |
| 5. | Select: Rename. | |
| 6. | Use keyboard to enter new name and select OK. | |
Navigating a Trail
A trail can be used to ride the originally recorded route (from start to end) or a return route (from end to start). When selecting a trail, the route includes navigation from your current location to the beginning of the trail.
| 1. | Navigate: Home > Navigation. | |
| 2. | Select: Search. | |
| 3. | Select: Trails. | |
| 4. | Select: Trail from list. | |
| 5. | Select:a. Route to Start: Take return route (end to start). b. Route to End: Take original route (start to end). | |
Deleting a Trail
| 1. | Navigate: Home > Navigation. | |
| 2. | Select: Search. | |
| 3. | Select: Trails. | |
| 4. | Select: Trail from list. | |
| 5. | Select: Delete. | |