![](/sip/blaise/resources/artwork/publication/icon-warning.png)
WARNING
The automatic-on headlamp feature provides increased visibility of the rider to other motorists. Be sure headlamp is on at all times. Poor visibility of rider to other motorists can result in death or serious injury. (00030b)
See the CUSTOMER SERVICE ASSISTANCE section at the very front of this owner's manual before the TABLE OF CONTENTS. Be sure to record all your key numbers in the space provided.
See
Figure 1. The ignition switch (1) controls electrical functions of the motorcycle. The key lock (2) locks the switch in the FORK LOCK or the ACCESS position.
NOTE
Harley-Davidson recommends removing key from ignition switch/fork lock before operating motorcycle. If you do not remove key, it can fall out during operation.
ACCESS - Accessories and hazard warning flasher can be turned on. Instrument lamps are on. Brake lamp and horn can be activated. Key may be removed.
The lamps illuminate when the switch is in the IGNITION position, as required by law in some localities.
NOTICE
Protect your vehicle against theft. Failure to lock the motorcycle after parking could result in theft and/or equipment damage. (00151b)
![](/sip/blaise/resources/artwork/publication/icon-warning.png)
WARNING
Do not operate vehicle with forks locked. Locking the forks restricts the vehicle's turning ability, which could result in death or serious injury. (00035a)
NOTICE
Do not lubricate barrel locks with petroleum based lubricants or graphite. Inoperative locks may result. (00152a)
NOTICE
Do not switch lubricant brands indiscriminately because some lubricants interact chemically when mixed. Use of inferior lubricants can damage the engine. (00184a)
Table 1. Ignition Switch/Fork Lock Positions
FUNCTION | LABEL | OPERATION |
---|
Key lock | LOCK | Locks the switch in either the FORK LOCK or ACCESS switch position. Remove the key for security. |
UNLOCK | Unlocks the switch. Unlocked, the switch can be rotated to any of the 4 positions. To prevent loss when riding, remove the key. |
Switch | FORK LOCK | Insert the key, rotate the switch to FORK LOCK and press the switch down. Turn the key to LOCK and the fork is locked. To unlock the fork, insert and rotate the key to UNLOCK and the switch will pop up. |
OFF | When the switch is in the OFF position, the ignition, lamps and accessories are off. |
IGNITION | When the switch is in the IGNITION position, the motorcycle can be started and all lamps and accessories will operate. |
ACCESS | When the switch is in the ACCESS position, all the lamps and accessories will operate but the engine can not be started. In ACCESS, the switch can be locked. |
Figure 1. Ignition Switch/Fork Lock