1. | Remove seat strap from under rider seat flap. | |
2. | Slide the pillion under the seat strap and engage the pillion bracket with the seat mounting screws. | |
3. | Tighten thumbscrew with washer to secure pillion to rear fender. | |
![]() After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
4. | Pull up on pillion to verify that it is properly secured. |
1. | Slide seat toward front of motorcycle to engage the tongue on the frame into the slot in the seat, while lowering the rear of the seat onto the seat mounting studs. | |
2. | Install the seat strap on the seat mounting studs. | |
3. | Install seat mounting screws. Tighten securely. | |
4. | Install the pillion, if desired. | |
![]() After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
5. | Pull up on seat and pillion to verify that it is properly secured. |
1 | Pillion thumbscrew |
2 | Pillion |
3 | Seat screws (2) |
4 | Seat |
5 | Seat mounting studs |