See Figure 1. The engine check lamp (1) indicate whether or not the engine/engine management system is operating normally. The engine lamp color is amber.

The engine lamp normally comes on when the motorcycle's ignition is first turned on and remains on for approximately 4 seconds, as the engine management system runs a series of self-diagnostics.

If the engine lamp comes on at any other time, see a Harley-Davidson dealer.

See Figure 1. The low fuel lamp (6) illuminates to indicate that you have approximately 3.79 L (1.00 USgal) of gasoline left in the tank. The low fuel lamp color is amber.

See Figure 1. The battery charging icon (5) illuminates to indicate either overcharging or undercharging of the battery. Refer to Maintenance and Lubrication → Battery: General.

See Figure 1. The security lamp (2) will illuminate when the security system is armed. Refer to Smart Security System → HARLEY-DAVIDSON SMART SECURITY SYSTEM.

Cruise control equipped models feature two additional indicator lamps.

See Figure 1. The amber ABS indicator lamp begins to flash at key ON to indicate that the system is operational. It continues to flash until motorcycle speed exceeds 5 km/h (3 mph). Continuous illumination of the lamp will only occur when ABS detects that the system is malfunctioning. In the diagnostic mode, the lamp will also illuminate to indicate the presence of diagnostic trouble codes (DTCs). See a Harley-Davidson dealer for service.