See Controls and Components → Boom! Box Hand Controls → Left Hand Control Audio Functions (typical). The HOME/VOLUME/PREVIOUS/NEXT five-way switch operates radio features on equipped vehicles.

The operation of the HOME switch depends on whether the Classic Mode setting is enabled. To enable or disable Classic Mode, see System Settings → Classic Mode.

HOME (normal mode): Press the HOME switch to display the Home screen. Press the switch again to display the current audio source (tuner station, media file, or phone screen).

HOME (Classic Mode): Press the HOME switch to toggle through available audio sources (tuner bands, media player connected through USB, or Bluetooth connected device). This operates similar to the MODE SEL switch on previous Harley-Davidson motorcycles. To display the Home screen, press and hold the HOME switch on the handlebar or use the HOME switch on the radio faceplate.

PREVIOUS/NEXT: Press the switch to the left or right to seek up/down for a radio station or to select the previous/next media file. Within the Tuner menus, this switch can be configured to advance to the next frequency (tune), the next station (seek) or the next preset. See Tuner → Tune.

VOLUME: Press the switch up to increase volume or down to decrease volume to the speakers or rider headset. The volume control can also unmute audio and resume media.

NOTE

Unlike the MUTE switch, decreasing volume to zero does not pause media.
The volume output is also affected by the speed volume setting. See System Settings → Speed Volume.
Phone calls and system prompts have independent volume levels. Adjust the volume for these different audio sources while they are active. See the sections for each of these functions for operation.