A maximum of six devices can be paired with the radio at one time. However, the radio only maintains an active Bluetooth connection with up to one device for phone service and one device for media at a time.
The motorcycle identifies itself as "H-D Radio". The name for the Bluetooth device is specified within the settings for your device.
NOTE
Phones may request permission to share information with "H-D Radio" (such as phone book contacts and text messages). These requests may occur during the pairing process or on other occasions when the phone is connecting with the radio.
  1. In the Bluetooth-compatible device, enable Bluetooth and set the device as discoverable. See the manual for your device.
  2. In the radio, select Home > Setup > Bluetooth Setup.
  3. See Figure 1. Select List Paired Devices > Add a New Device. All discoverable devices within range appear in the list of found devices.
  4. Select the device to be paired from the list.
  5. The device displays a PIN code and prompt for permission to pair with "H-D Radio". Allow the pairing within the device.
  6. See Figure 2. In the radio, select Yes. The radio attempts to pair and connect with the device.
  7. The system prompts for an emergency phone number if one is not already stored in the system. Enter a phone number to call in the event of an emergency (such as 911 in the US).
  8. Select Save in lower right corner of the screen.
  9. The system begins downloading the phone book from the device. The Phone Book icon is displayed in the status bar during the download process. During this process, the phone may prompt for permission to share the phone book.
Figure 1. Adding a New Device
Figure 2. Pairing a Device: iPhone Example Shown