WARNINGBefore starting engine, be sure throttle control will snap back to idle position when released. A throttle control that prevents engine from automatically returning to idle can lead to loss of control, which could result in death or serious injury. (00390a)
| 1. | Verify that the motorcycle is in neutral. | |
| 2. | Press the engine off/run switch to the run position. | |
| 3. | Turn ignition switch to IGNITION. Do not twist the throttle. NOTE The engine lamp will light for approximately 4 seconds and the fuel pump will run for approximately 2 seconds. | |
| 4. | Squeeze the clutch lever in against the handgrip. | |
| 5. | Press the start switch. NOTE If engine does not start, verify engine off/run switch is in run position. | |
NOTICE The engine should be allowed to run slowly for 30-60 seconds. This will allow the engine to warm up and let oil reach all surfaces needing lubrication. Failure to comply can result in engine damage. (00181b) | ||
| 6. | Raise the jiffy stand before beginning forward movement. |