1. | Make sure the ignition is turned OFF. | |
2. | Remove the front right side cover. a. For VRSCF model, see Maintenance and Lubrication → Front Side Covers: VRSCF Model. b. For other models, remove the fastener from the front right side cover and carefully lift the side cover off the mounting tabs. | |
3. | See Figure 1. The front fuse block is mounted on the top right side of the battery box. Pull the tabs out from the sides of the fuse block cover. Remove cover. | |
4. | See Figure 2. Remove the suspect fuse and inspect the element. Replace the fuse if the element is burned or separated. | |
5. | Install the fuse block cover. Carefully press the cover until tabs snap into place. | |
6. | Install the right front side cover. a. For VRSCF model, see Maintenance and Lubrication → Front Side Covers: VRSCF Model. b. For other models, install front side cover on the mounting tabs. Line up the hole on the cover with the threaded hole in the frame tab and install the fastener. Tighten the fastener to 4.1–6.8 N·m (36.3–60.2 in-lbs). |
1 | Front fuse block (cover removed) |
2 | Main fuse |
1 | Spare (15 amp.) |
2 | Start relay |
3 | ABS fuse (ABS-equipped models only, 30 amp.) |
4 | Battery (15 amp.) |
5 | Ignition (15 amp.) |
6 | Fan relay |
1 | Spare (15 amp.) |
2 | Security (15 amp.) |
3 | Accessory (15 amp.) |
4 | P&A Ignition (2 amp. max) |
5 | Lights (15 amp.) |
6 | ECM power (15 amp.) |
7 | Fuel pump (15 amp.) |
8 | System relay |
1. | Remove the front right side cover. a. For VRSCF model, see Maintenance and Lubrication → Front Side Covers: VRSCF Model. b. For other models, remove the fastener from the front right side cover and carefully lift the side cover off the mounting tabs. | |
2. | If equipped with security system siren, turn the ignition switch ON with the hands-free fob present to disarm the security system. | |
3. | Grasp the fuse holder in one hand, the plastic body of the main fuse in the other, and pull the main fuse straight out of the fuse holder. | |
4. | Insert the prongs of the new main fuse in the fuse holder slots. Push the main fuse firmly down into the fuse holder. | |
5. | Install the right front side cover. a. For VRSCF model, see Maintenance and Lubrication → Front Side Covers: VRSCF Model. b. For other models, install front side cover on the mounting tabs. Line up the hole on the cover with the threaded hole in the frame tab and install the fastener. Tighten the fastener to 4.1–6.8 N·m (36.3–60.2 in-lbs). |