Regular lubrication and maintenance will help keep your new Harley-Davidson operating at peak performance. Your Harley-Davidson dealer knows best how to service your motorcycle with factory approved methods and equipment assuring you of thorough and competent workmanship.

NOTE

Refer to Table 1. Regular maintenance interval operations are required to keep your new motorcycle warranty in force. The use of other than Harley-Davidson approved parts and service procedures may void the warranty. Any alterations to the emission system components, such as the exhaust system, may be in violation of Federal and State laws.
Refer to Table 2. When servicing your motorcycle, bring this owner's manual to the dealership and complete information needed in the blank columns listed.

WARNING

Perform the service and maintenance operations as indicated in the regular service interval table. Lack of regular maintenance at the recommended intervals can affect the safe operation of your motorcycle, which could result in death or serious injury. (00010a)

WARNING

If you operate your motorcycle under adverse conditions (severe cold, extreme heat, very dusty environment, very bad roads, through standing water, etc.), you should perform the regular maintenance intervals more frequently to ensure the safe operation of your motorcycle. Failure to maintain your motorcycle could result in death or serious injury. (00094a)

Table 1. Regular Service Intervals: 2011 VRSC Models

ITEM SERVICED	PROCEDURE	1000 MI 1600 KM	5000 MI 8000 KM	10,000 MI 16,000 KM	15,000 MI 24,000 KM	20,000 MI 32,000 KM	25,000 MI 40,000 KM	30,000 MI 48,000 KM	NOTES
Engine oil and filter	Replace	X	X	X	X	X	X	X
Oil lines and brake system	Inspect for leaks, contact or abrasion	X	X	X	X	X	X	X	1, 3
Air cleaner	Inspect, service as required		X	X	X	X	X	X
Tires	Check pressure, inspect tread	X	X	X	X	X	X	X
Clutch fluid	Check level and condition	X	X	X	X	X	X	X	4
Drive belt and sprockets	Inspect, adjust belt	X	X	X	X	X	X	X	1
Throttle, brake and clutch controls	Check, adjust and lubricate	X	X	X	X	X	X	X	1
Jiffy stand	Inspect and lubricate	X	X	X	X	X	X	X	1
Brake fluid	Inspect sight glass	X	X	X	X	X	X	X	4
Brake pads and discs	Inspect for wear	X	X	X	X	X	X	X
Spark plugs	Inspect		X		X		X
Spark plugs	Replace			X		X		X
Electrical equipment and switches	Check operation	X	X	X	X	X	X	X
Front fork oil		Replace every 80,000 km (50000 mi)							1, 5
Steering head bearings	Adjust	X				X		X	1, 2
Valve lash		Inspect valve lash every 24,000 km (15000 mi) and adjust if necessary							1, 6
Cooling system	Inspect; check clamps for tightness, check coolant freeze point	X		X		X		X	1
Coolant		Replace every 48,000 km (30000 mi)							1
Radiator	Clean	X	X	X	X	X	X	X
Critical fasteners	Check tightness	X		X		X			1
Battery	Check battery and clean connections								3
Exhaust system	Inspect for leaks, cracks, and loose or missing fasteners or heat shields	X	X	X	X	X	X	X	3
Road test	Verify component and system functions	X	X	X	X	X	X	X
NOTES:	1. Should be performed by an authorized Harley-Davidson dealer, unless you have the proper tools, service data and are mechanically qualified. 2. Disassemble, inspect and lubricate every 48,000 km (30000 mi). 3. Perform annually or at specified intervals, whichever comes first. 4. Change D.O.T. 4 hydraulic brake/clutch fluid and flush system every two years. 5. Replace fork oil and inspect every 80,000 km (50000 mi). 6. Could vary with frequency of operation and riding style.

Table 2. Owner's Maintenance Records

SERVICE MILE INTERVAL	DATE	DEALER NUMBER	TECHNICIAN NAME	TECHNICIAN SIGNATURE
1000 MI (1600 KM)
5000 MI (8000 KM)
10,000 MI (16,000 KM)
15,000 MI (24,000 KM)
20,000 MI (32,000 KM)
25,000 MI (40,000 KM)
30,000 MI (48,000 KM)
35,000 MI (56,000 KM)
40,000 MI (64,000 KM)
45,000 MI (72,000 KM)
50,000 MI (80,000 KM)