See Figure 1. On the VRSCF model, the mirror stems operate as front turn signals. Use the following procedure to properly align the front turn signals and position the rear view mirrors.
NOTE
See Figure 2. Always loosen fasteners before changing the position of the turn signals or mirrors. Simply pushing the mirror face or stem may cause damage to the assembly.
1. See Figure 2. Loosen the nut on the mirror stem. Adjust the front turn signal so it is directed straight ahead, with the lighted surface facing the forward direction of the vehicle as shown in Figure 1.
2. Tighten nut to 7.3–8.5 N·m (64–75 in-lbs).
3. Loosen the screw on the rear of the mirror. Adjust the mirror to desired position (without changing the orientation of the front turn signal).
4. Tighten screw to 4.1–6.8 N·m (36–60 in-lbs).
1Front turn signal (perpendicular to forward direction of vehicle)
2Mirror
Figure 1. Mirror/Turn Signal Alignment: VRSCF Model
1Mirror screw
2Mirror stem nut
Figure 2. Mirror/Turn Signal Fasteners: VRSCF Model