![](/sip/blaise/resources/artwork/publication/icon-warning.png)
WARNING
The automatic-on headlamp feature provides increased visibility of the rider to other motorists. Be sure headlamp is on at all times. Poor visibility of rider to other motorists can result in death or serious injury. (00030b)
See
Figure 1. The ignition switch controls electrical functions of the motorcycle. Refer to
Table 1 for switch functions.
NOTE
Write the ignition key number in the space provided at the front of this manual.
Remove the key from ignition switch before operating motorcycle. If you do not remove key, it can fall out during operation.
The lamps illuminate when the switch is in the IGNITION position, as required by law in some localities.
NOTICE
Protect your vehicle against theft. Failure to lock the motorcycle after parking could result in theft and/or equipment damage. (00151b)
![](/sip/blaise/resources/artwork/publication/icon-warning.png)
WARNING
Do not operate vehicle with forks locked. Locking the forks restricts the vehicle's turning ability, which could result in death or serious injury. (00035a)
NOTICE
Do not lubricate barrel locks with petroleum based lubricants or graphite. Inoperative locks may result. (00152a)
Table 1. Ignition/Headlamp Switch/Fork Lock Positions
FUNCTION | LABEL | OPERATION |
---|
Key lock | LOCK | Locks the ignition switch in the FORK LOCK or ACCESS position. Insert the key and rotate 1/4 turn to the LOCK position. Remove key. |
UNLOCK | Unlocks the ignition switch. Insert key and rotate 1/4 turn to the UNLOCK position. Remove key before operating motorcycle. |
Switch | FORK LOCK | Locks the fork to discourage unauthorized use or theft of the motorcycle when parked. To lock the fork, turn the handlebars to the full left position and rotate the switch to the FORK LOCK position. The switch can be locked using the ignition key or power lock fob. |
OFF | The ignition, lamps and accessories are off. |
IGNITION | The motorcycle can be started and all lamps and accessories will operate. |
ACCESS | All lamps and accessories will operate but the engine can not be started. Hazard warning flashers can be turned on. Brake lamp and horn can be activated. The switch can be locked using the ignition key or power lock fob. |
Figure 1. Ignition/Headlamp Switch/Fork Lock