Disengaging Cruise Control
The cruise control automatically disengages whenever the cruise control module receives one of the following inputs:
Front and/or rear brake is applied.
Throttle is rolled back or closed, thereby actuating roll-off (disengage) switch.
Motorcycle clutch is disengaged (module senses too great an increase in RPM).
Vehicle speed is out of the operating range.
NOTE
Rolling on the throttle more than 16 km/h (10 mph) above the set speed may also deactivate the cruise control.
When the cruise is disengaged, the green cruise engaged icon on the face of the gauge changes to orange. The orange cruise control system icon remains ON until the main switch is turned off.
However, should you decide to SET a cruise speed, RESUME last set speed, ACCELERATE or DECELERATE, simply press the RESUME/SET switch.
Resuming Cruise Speed
If the system is deactivated using one of the methods described under DEACTIVATING CRUISE CONTROL, the system is still ON should you decide to RESUME the set speed. To accomplish this, simply press the RESUME/SET switch to RESUME.
NOTE
The computer will hold the SET speed in memory for the RESUME function. If the vehicle speed drops more than 24 km/h (15 mph) below the SET speed, speed can no longer be RESUMED. If cruise operation is still desired, press the RESUME/SET switch to SET to reset the cruise speed.
Deactivating Cruise Control
Push the CRUISE switch to turn off cruise control. The orange icon in the gauge is extinguished to indicate the system is OFF.