General
When Tour-Pak is installed, the antenna is mounted on left rear of Tour-Pak. With Tour-Pak removed, the antenna may be mounted on the chassis antenna mount.
Installing Antenna with Tour-Pak Removed
  1. See Figure 1. With 2 mm hex wrench, remove lower setscrew and unscrew antenna from Tour-Pak mount.
  2. See Figure 2. Unscrew coaxial adapter from antenna chassis mount.
  3. Place coaxial adapter in Tour-Pak so it is available for installation when Tour-Pak is installed.
  4. See Figure 3. Screw antenna onto chassis mount and tighten set screw.
Figure 1. Radio Antenna and Tour-Pak
Figure 2. Coaxial Adapter
Figure 3. Radio Antenna without Tour-Pak
Installing Antenna with Tour-Pak Installed
  1. See Figure 3. With 2 mm hex wrench remove lower setscrew and unscrew antenna from chassis mount.
  2. See Figure 2. Screw coaxial adapter on antenna chassis mount.
  3. See Figure 1. Screw antenna onto Tour-Pak mount and tighten set screw.
  4. Pull enough coaxial cable from Tour-Pak to reach coaxial adapter on antenna chassis mount. Allow for a small amount of slack in the cable.
  5. See Figure 4. Screw coaxial cable connector into coaxial adapter on antenna chassis mount. Finger-tighten securely.
Figure 4. Coaxial Adapter Installed