NOTICE
There are no serviceable parts inside the unit; leave all servicing to qualified service personnel. Disassembly of the unit could result in equipment damage and/or equipment malfunction. (00172a)
WARNINGDo not change compact discs while riding, and do not select a volume level that blocks out traffic noise. Distractions or a volume level that blocks out traffic noise, could cause loss of control resulting in death or serious injury. (00086a)
WARNINGDo not disassemble unit. Laser radiation is present if disc player is disassembled and the interlock fails or is defeated. Exposure to laser radiation could lead to death or serious injury. (00087a)
Auto Load
With the receiver POWER on, raise the CD door and gently insert a CD, label side up, into the CD slot until the unit automatically pulls the CD into the player.
The receiver will automatically switch to CD operation. The CD track number and play time will appear in the LCD display. With a CD in the player, CD is added to the modes selectable with MODE SEL.
WARNINGSet volume levels and other controls on audio and electronic devices before riding. Distractions can lead to loss of control, resulting in death or serious injury. (00088b)
BAD DISC Error Message
See Figure 1. If the CD loaded into the CD player is damaged, of incorrect format, or if upside down, the LCD will display the BAD DISC error message.
Eject and replace the CD. See Premium Sound System → Recommendations for Handling CDs.
Figure 1. BAD DISC Error Message
CD Eject
WARNINGDo not change compact discs while riding, and do not select a volume level that blocks out traffic noise. Distractions or a volume level that blocks out traffic noise, could cause loss of control resulting in death or serious injury. (00086a)
Press the EJECT button found under the CD door to eject a CD. The CD will be partially ejected. Remove the CD. Close and latch the CD door.
The receiver will automatically return to the band and frequency playing when the CD was loaded and the CD mode is no longer selectable.
Changing CD Tracks
To change CD tracks, use the right thumb and press the MODE SEL switch on the right hand grip. Press UP and release to select higher numbered tracks or press DN and release to select lower number tracks.
The track selection number will be displayed in the LCD.
NOTE
If the MODE SEL switch is pressed and held UP or DN longer than 1.5 seconds, the track selections will fast advance or reverse as long as the switch is held.
See F in Premium Sound System → Receiver Operation: FLHTCSE2 → LCD Screen Examples: FLHTCSE2. CD track selection wraps around the first and last track.
Repeating Tracks
To repeat a CD track while it is playing, press the MODE SEL switch DN and quickly release.
NOTE
If the play time has been less than 2 seconds, the previous track will be played.
Fast Advance and Reverse
To fast advance a track, press the MODE SEL switch UP and hold longer than 1.5 seconds. The current track will fast advance while the switch is pressed UP. The audio will advance to the subsequent track as long as the switch is held UP.
See F in Premium Sound System → Receiver Operation: FLHTCSE2 → LCD Screen Examples: FLHTCSE2. The play time display in the LCD will also fast advance.
To fast reverse a track, press MODE SEL DN and hold longer than 1.5 seconds. The current track will fast reverse while the switch is pressed DN.
The play time display in the LCD will also fast reverse.
Random Play
To play CD tracks randomly, press the 4*RND button on the front panel while in the CD mode. No selection is repeated until all other selections have been played.
NOTE
The 4*RND button toggles between normal and random play. Press once for random play. Press a second time to return to normal play. Random can also be cancelled by pushing the MOD SEL switch up or down.
See G in Premium Sound System → Receiver Operation: FLHTCSE2 → LCD Screen Examples: FLHTCSE2. RND will appear in the LCD.