1 | Seat strap |
2 | Fastener and flat washer |
1. | See Figure 3. Place seat on frame backbone. | |
2. | See Figure 2. Firmly push front of seat downward and forward until tongue engages slot in frame backbone. | |
3. | Push seat forward until rear fender seat retention nut is centered in hole of mounting bracket. | |
4. | Install fastener. NOTE If the seat retention nut is damaged or lost, see Seat Retention Nut Replacement in the appropriate service manual for instructions. | |
WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
5. | Pull up on seat to verify that it is properly secured. |
1 | Tongue |
2 | Seat bottom |
1 | Slot |
2 | Frame backbone |