NOTE
See
Accessories Maintenance → Leather Care
for proper saddlebag care.
Opening
See
Figure 1
. Depress button on front inboard side of saddlebag and while holding button in, raise lid.
Closing
Lower lid until latch assembly fastens.
Removing
See
Figure 2
. The saddlebags are secured to the support brackets by quarter turn fasteners called bail head studs.
NOTE
International models do not have the wire form bail. Use a flat bladed screwdriver to turn studs on international models.
Open the saddlebag.
Unscrew studs by turning one-quarter turn counterclockwise.
Remove the saddlebag.
Installing
Carefully place saddlebag in position on saddlebag rail and align the bail head studs with the support bracket fasteners.
See
Figure 2
. Fasten studs by pushing into support bracket fasteners and turning 1/4 turn clockwise.
Check that the saddlebag is securely fastened.
View interactive image
Figure 1. Open Saddlebag: FLHRSE4
View interactive image
Figure 2. Bail Head Studs: FLHRSE4