The FLHRSE3 is equipped with leather covered saddlebags with chrome trim. The motorcycle also includes carry out saddlebag liners that can easily be placed and removed from the saddlebags.
NOTE
See Accessories Maintenance → Leather Care for proper saddlebag care.
Opening
See Figure 1. Depress button on front inboard side of saddlebag and while holding button in, raise lid.
Closing
Lower lid until latch assembly fastens.
Removing
See Figure 2. The saddlebags are secured to the support brackets by quarter turn fasteners called bail head studs.
NOTE
International models do not have the wire form bail. Use a flat bladed screwdriver to turn studs on international models.
  1. Open the saddlebag.
  2. Unscrew studs by turning one-quarter turn counterclockwise.
  3. Remove the saddlebag.
Installing
  1. Carefully place saddlebag in position on saddlebag rail and align the bail head studs with the support bracket fasteners.
  2. See Figure 2. Fasten studs by pushing into support bracket fasteners and turning 1/4 turn clockwise.
  3. Check that the saddlebag is securely fastened.
Figure 1. Open Saddlebag: FLHRSE3
Figure 2. Bail Head Studs: FLHRSE3