1 | Seat |
2 | Seat strap |
3 | Seat strap bracket |
4 | Seat fastener |
1. | Place seat on frame backbone. | |
2. | See Figure 3 and Figure 4. Firmly push front of seat downward and rearward until tongue engages slot in frame backbone. | |
3. | Push seat forward until rear fender seat retention nut is centered in hole of mounting bracket. | |
4. | Install fastener to secure seat to rear fender. NOTE If seat retention nut is damaged or lost, see service manual for instructions. | |
5. | Insert end of seat strap into slot of seat strap bracket. | |
6. | Install seat strap bracket and tighten to 5.4–8.1 N·m (48–72 in-lbs). | |
7. | Pull up on seat to verify that it is properly secured, front and rear. | |
WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
8. | Install saddlebag. | |
9. | Install passenger and rider backrests. |
1 | Tongue |
2 | Seat bottom |
1 | Slot |
2 | Frame backbone |