1. | Place seat on frame backbone. NOTE There is a tab at the front of the seat that slips under the rear fuel tank mount. | |
2. | Slide seat toward front of motorcycle until the tab locks under the fuel tank mount. | |
3. | See Figure 1. Push seat forward until rear fender seat retention nut is centered in hole of mounting bracket. | |
4. | Install washer and nut to secure seat straps. | |
5. | Install screw and bracket to fender. | |
WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
6. | Pull up on seat to verify that it is properly secured. |
1 | Screw |
2 | Seat strap |
3 | Seat |