WARNINGThe automatic-on headlamp feature provides increased visibility of the rider to other motorists. Be sure headlamp is on at all times. Poor visibility of rider to other motorists can result in death or serious injury. (00030b)
See YOUR OWNER'S MANUAL section. Be sure to record all your key numbers in the space provided at the front of this book.
The ignition/headlamp key switch controls electrical functions of the motorcycle. Refer to Table 1 for key switch functions.
NOTICE
Protect your vehicle against theft. Failure to lock the motorcycle after parking could result in theft and/or equipment damage. (00151b)
NOTICE
Do not lubricate barrel locks with petroleum based lubricants or graphite. Inoperative locks may result. (00152a)
See Figure 1. The key switch can be locked in the OFF or ACCESSORY position. To lock the keyswitch, lift the switch cover, insert key, and turn to the lock position (1/4 turn counterclockwise). Remove the key. The switch will remain locked in its position.
To unlock the key switch, insert key and turn to the unlock position (1/4 turn clockwise). Remove the key. The switch will be free to move to any position.
NOTE
The lamps work when the switch is in the IGNITION position, as required by law in some localities.
Remove key from ignition before operating motorcycle. If you do not remove key, it can fall out during operation.
Table 1. Ignition/Headlamp Key Switch Positions: 2009 FXDFSE
SWITCH POSITION | FUNCTION |
|---|---|
OFF | Ignition, lamps and accessories are off. |
ACC* | Accessories can be turned on. Instrument lamps and tail lamp are on. Brake lamp and horn can be activated. Tail lamp is on. |
IGNITION* | Ignition, lamps and accessories are on. |
*International models have an additional function - position lamp is on. | |
| 1 | Lock position |
| 2 | Unlock position |
| 3 | Open switch cover |
Figure 1. Ignition/Headlamp Key Switch: FXDFSE