1. | Remove the main fuse. See Service Procedures → Fuses. | |
2. | Remove the trim ring. Support the lens and reflector. | |
3. | See Figure 1. Remove the spade connectors from the bulb. | |
4. | Pull the bulb holder from the lens and reflector. | |
5. | Pull bulb out to remove. Push bulb in to install. | |
6. | Install the bulb and holder. | |
7. | Match the reflector tab to the adapter ring notch. | |
8. | Install the trim ring. Tighten to: Torque: 1–1.5 N·m (9–14 in-lbs) Trim ring screw |