Low Beam/Flash to Pass
Low beam: See
Figure 1. Press the bottom of the switch to activate the low beam.
Flash to pass: When the low beam switch is on, press and release the flash to pass switch to flash the high beam before passing another vehicle. The high beam indicator lamp is illuminated as long as the flash to pass switch is pressed.
When in accessory, press the flash to pass switch to activate the headlamp. Refer to
Table 1.
Left Turn Signal
Activate: See
Figure 1. Press the left turn signal switch to activate the left turn signal. Refer to
Table 1.
Cancel:
Manual Operation: Press and release the turn signal switch a second time.
Automatic Operation: The turn signal lamps automatically cancel when a full turn has been detected based on speed, acceleration and turn completion.
The lamps also cancel if the turn signal has been activated for a prolonged period (20 flashes) while the motorcycle speed is greater than 11 km/h (7 mph). If the motorcycle is stopped or moving slower than this speed, the turn signal continues flashing.
NOTE
Front turn signal lamps also function as running lamps. This feature may not be available in all markets.
Figure 1. Left Hand Switch Module
Table 1. Left Hand Control Switches
SWITCH | NAME | FUNCTION |
---|
| Trip | Press the switch to alternate odometer displays. |
| Horn | Press the switch to sound the horn. |
| High beam | Press the switch to switch the headlamp to high beam. |
| Low beam/ flash to pass | Press the switch to switch the headlamp to low beam. Press and release to flash the high beam. In ACC, press to activate the headlamp. |
| Left turn | Press the switch to activate the left turn signal. |