1. Remove the main fuse. See Maintenance and Lubrication → Fuses.
2. Remove the trim ring. Support the lens and reflector.
3. See Figure 1. Remove the spade connectors from the bulb.
4. Pull the bulb holder from the lens and reflector.
5. Turn the bulb one-quarter turn to remove. Install with a one-quarter turn.
6. Install the bulb and holder.
7. Match the reflector tab to the adapter ring notch.
8. Install the trim ring. Tighten to 1–1.5 N·m (9–14 in-lbs).
Figure 1. Position Lamp