Trip
The TRIP switch activates the trip odometers. It is used to activate the odometer display to scroll through the optional screens. With the ignition off, the TRIP switch can activate time or odometer displays. Refer to Table 1.
Horn
See Figure 1. Press the HORN switch to activate the horn. The horn can be activated for up to 10 seconds at a time. If the HORN switch is held for a longer period, the horn will automatically deactivate. Refer to Table 1.
High Beam
See Figure 1. Press the high beam switch to activate the high beam. The (blue) high beam indicator lamp is lit when the high beam is on. Refer to Table 1.
Low Beam/Flash to Pass
Low beam: See Figure 1. Press the bottom of the switch to activate the low beam.
Flash to pass: When the low beam switch is on, press and release the flash to pass switch to flash the high beam before passing another vehicle. The high beam indicator lamp is illuminated as long as the flash to pass switch is pressed.
When in accessory, press the flash to pass switch to activate the headlamp. Refer to Table 1.
Left Turn Signal
Activate: See Figure 1. Press the left turn signal switch to activate the left turn signal. Refer to Table 1.
Cancel: Press the left turn signal switch to cancel the left turn signal. For detailed operation, see Controls and Indicators → Turn Signal Switch Operation.
NOTE
Front turn signal lamps also function as running lamps. This feature may not be available in all markets.
1Trip
2Horn
3High beam
4Low beam/flash to pass
5Left turn signal
Figure 1. Left Hand Switch Module
Table 1. Left Hand Control Switches
SWITCH
NAME
FUNCTION
Trip
Press the switch to alternate odometer displays.
Horn
Press the switch to sound the horn.
High beam
Press the switch to switch the headlamp to high beam.
Low beam/
flash to pass
Press the switch to switch the headlamp to low beam.
Press and release to flash the high beam.
In ACC, press to activate the headlamp.
Left turn
Press the switch to activate the left turn signal.