Speedometer
See Figure 1. The speedometer is calibrated in miles per hour, (mph) (1), kilometer per hour (km/h) (3) or in dual miles per hour (mph) and kilometers per hour (km/h) (2).
1mph
2mph/km/h
3km/h
4Odometer toggle button
5Odometer/tachometer display
Figure 1. Speedometer/Tachometer
Gear/Tachometer
See Figure 2. With the ignition on, press and release the toggle switch button to toggle through the odometer displays to the gear/tachometer display (5). The display shows the current gear selection and the engine speed in revolutions per minute (rpm).
NOTE
The gear selection number only changes to match the current gear when the motorcycle is moving.
Odometer: Mileage, Trip A, Trip B
See Figure 2. With the ignition on, press and release the toggle switch button (2) to toggle between the odometer (1), trip odometer A (3) and trip odometer B (4).
To reset a trip odometer to zero, press and hold the toggle switch button.
1Odometer
2Toggle switch button
3Trip A
4Trip B
5Gear/tachometer
Figure 2. Gear/Tachometer/Odometer
Odometer Messages
Low Fuel Trip Meter (LF): See Figure 3. When the low fuel indicator illuminates in the speedometer face, a low fuel message (LF) (1) appears in the odometer window with a mileage number. See Operation → Indicators.
The displayed mileage is not the remaining fuel mileage, it is a count up display. The displayed LF mileage indicates the point the low fuel indicator activated.
Tip (tiP): See Figure 3. When the motorcycle is tipped over, the work "tiP" (2) appears in the odometer window. The engine does not restart until the ignition is reset.
To reset, pick up the motorcycle and cycle the ignition switch OFF-IGNITION.
Fob Low Battery (FOB LOW BATT): See Figure 3. If the battery in the security fob is low, the message "FOB LOW BATT" (3) will scroll in the odometer widow. Change the fob battery. See SECURITY SYSTEM → Security System Fob.
Transport Mode Active (tSPORT MODE ACTIVE): See Figure 3. The security system is in the transport mode when the "tSPORT MODE ACTIVE" message (4) will scroll in the odometer window. See SECURITY SYSTEM → Transport Mode.
No Fob (NO FOB): See Figure 3. When the system cannot communicate with the fob, this message (5) is displayed. See SECURITY SYSTEM → Troubleshooting.
1Low fuel trip meter
2Tip
3Low fob battery (scroll)
4Transport mode (scroll)
5No fob
Figure 3. Odometer Window Messages
Clock
See Figure 4. With the ignition on, press and release the toggle switch button to toggle through the odometer displays to the time display.
To set the time:
  1. Press and hold the toggle switch button until 12h (2) begins blinking in the odometer display. Release the toggle.
  2. Press and release the toggle once (3) to advance to a blinking 24h or military style display. Each press and release of the toggle, switches the display between 12h and 24h.
  3. When the desired time style is displayed, press and hold the toggle (4) until the hours are blinking.
  4. Press and release the toggle repeatedly (5) to advance the hours.
  5. When the correct hour is displayed, press and hold the toggle until the minutes (6) start blinking.
  6. Press and release the toggle switch button repeatedly to advance the minutes display (7).
  7. When the correct minute is displayed, press and hold the toggle until the minutes stop blinking.
Figure 4. Setting the Clock