If the fob is misplaced or fails, a personal identification number (PIN) can disarm the security system. The dealership assigns the initial PIN.
Disarming with a PIN
NOTE
If a mistake is made while entering the PIN, turn ignition OFF then back to IGNITION before another attempt.
  1. See Figure 1. While the security indicator lamp is flashing, turn the ignition switch to IGNITION. The odometer window displays ENTER PIN.
  2. Press and release the odometer toggle button. The first digit space flashes.
  3. Input five digits of the PIN.
    1. Press and release the odometer toggle button to cycle the digit in the PIN.
    2. Press and hold the odometer toggle button for 1.5 seconds to enter the number. The display cycles to the next digit in the PIN.
    3. Repeat until all five digits of the PIN have been entered.
    4. NOTE
    • If the digit cycles past 9, the digit starts over at 1.
    • If any of the digits do not match assigned PIN, the security system is activated.
  4. The vehicle is disarmed and ready to start.
1Odometer window
2Toggle switch button
Figure 1. Inputting the PIN (Sample PIN Shown)
Changing the PIN
The dealership sets a temporary PIN when they are setting up the motorcycle for delivery. The owner can change the PIN at any time.
  1. Select a five-digit number (1-9, no zeros).
  2. With an assigned fob present, cycle to the ENTER PIN prompt in the odometer window.
    1. See Figure 1. Cycle the ignition switch twice: IGNITION-OFF-IGNITION-OFF-IGNITION.
    2. Press and release the odometer toggle button twice to display the ENTER PIN prompt.
    3. On the ENTER PIN prompt, press and hold the odometer toggle button for 1.5 seconds.
    4. Verify that the current PIN is displayed and the first digit flashes.
  3. The turn signals flash three times.
  4. Repeat until all five digits have been entered.
    1. Press and release the odometer toggle button to cycle the flashing digit to the digit (1-9) that matches your selected number.
    2. To enter the flashing number, press and hold the odometer toggle button for 1.5 seconds. The display cycles to the next digit.
  5. To store the new PIN, turn the ignition switch to OFF .
  6. Record the PIN on the Personal Information page in the front of this Owner's Manual and on the removable wallet card.