Armed
When the motorcycle is parked, motionless and the ignition switch set to OFF, the security system arms automatically within 5 seconds. Whether the fob is present or not, the system will arm.
On arming, the turn signals flash twice and the siren (if equipped and in chirp mode) chirps twice. While armed, the indicator in the speedometer face flashes every few seconds.
Disarmed
Fob: An armed security system is automatically disarmed when the fob is present and the ignition switch is set to IGNITION.
NOTE
Movement like lifting the motorcycle off of its jiffy stand or a NO FOB condition, will cause the system to electronically seek the presence of the fob. If the fob is present, the system disarms. See Operation → Instruments.
When the system disarms, the siren (if equipped and in chirp mode) chirps once and the security indicator lamp flashes fast for several seconds then turns off.
Once disarmed, the rider can ride or move the motorcycle for parking, storage or service without setting off the alarm.
Disarming with a PIN
If the fob is misplaced or if the fob fails to communicate, the system can be disarmed with the Personal Identification Number (PIN).
NOTE
If a mistake is made while entering the PIN, turn ignition OFF then back to IGNITION before another attempt.
  1. See Figure 1. While the security indicator lamp is flashing, turn the ignition switch to IGNITION. The odometer window displays ENTER PIN.
  2. Press and release the odometer toggle button. The first digit space flashes.
  3. Input five digits of the PIN.
    1. Press and release the odometer toggle button to cycle the digit in the PIN.
    2. Press and hold the odometer toggle button for 1.5 seconds to enter the number. The display cycles to the next digit in the PIN.
    3. Repeat until all five digits of the PIN have been entered.
  4. NOTE
    • If the digit cycles past 9, the digit starts over at 1.
    • If any of the digits do not match assigned PIN, the security system is activated.
  5. The vehicle is disarmed and ready to start.
1Odometer window
2Toggle switch button
Figure 1. Inputting the PIN (Sample PIN Shown)