WARNINGThe automatic-on headlamp feature provides increased visibility of the rider to other motorists. Be sure headlamp is on at all times. Poor visibility of rider to other motorists can result in death or serious injury. (00030b)
See YOUR OWNER'S MANUAL section. Make sure to record all your key numbers in the space provided at the front of this book.
See Unresolved graphic link. The ignition switch controls electrical functions of the motorcycle.
WARNINGDo not operate vehicle with forks locked. Locking the forks restricts the vehicle's turning ability, which could result in death or serious injury. (00035a)
NOTICE
Protect your vehicle against theft. Failure to lock the motorcycle after parking could result in theft and/or equipment damage. (00151b)
NOTICE
Do not lubricate barrel locks with petroleum based lubricants or graphite. Inoperative locks may result. (00152a)
NOTICE
Turn the Ignition/Light Key Switch knob to the FORK LOCK position (FLHTP) or OFF position (FLHP) before locking. Leaving the key in the ACC position will keep the instrument lights on and result in a discharged battery. (00153b)
NOTICE
Do not switch lubricant brands indiscriminately because some lubricants interact chemically when mixed. Use of inferior lubricants can damage the engine. (00184a)
- FLHP: Push key in and turn it counterclockwise.
- FLHTP: Push key in and turn clockwise.
- Remove key.
NOTE
- Harley-Davidson recommends removing key from ignition/fork lock before operating motorcycle. If you do not remove key, it can fall out during operation.
- ACCESS/ACCESSORY - Accessories and hazard warning flasher can be turned on. Instrument lamps are on. Brake lamp and horn can be activated. Key may be removed.
- The lamps illuminate when the switch is in the IGNITION position, as required by law in some localities.