NOTE
Do not remove trim ring for headlamp adjustment.
Set headlamp beam to high beam.
See
Figure 1
. Locate the headlamp adjuster.
NOTE
Frame-mounted fairing models can only be adjusted vertically. Three optional tools will turn the adjustment screw.
9 mm socket
6 mm hex
T15 Torx
See
Figure 2
. Turn the adjuster to adjust light beam hot spot at crossed lines.
View interactive image
Figure 1. Headlamp Adjuster
View interactive image
1
Headlamp centerline minus 2.1 in (53.3 mm)
2
Headlamp high beam area
Figure 2. High Beam Light Pattern