The passenger footrests are adjustable up or down to one of three positions. The footrests can also be angled for passenger comfort.
Height Adjustment
See Figure 1. If the bracket does not slide up or down, loosen but do not remove the lower shoulder bolt (5).
1. Remove the upper bracket screw (1) and lockwasher (2).
2. Select one of the three height positions.
If necessary, remove any plastic plugs in the frame mounting holes (3).
3. Slide the bracket and footboard assembly to the selected mounting hole.
4. Install the upper bracket screw and washer. Tighten to 48.8–56.9 N·m (36–42 ft-lbs).
5. If loosened, tighten the lower shoulder screw. Tighten to 5.4–8.1 N·m (48–72 in-lbs).
Angle Adjustment
1. See Figure 1. Loosen the end screw (6).
2. Rotate as desired.
3. Apply LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (blue) to the end screw. Tighten to 20.3–27.1 N·m (15–20 ft-lbs).
3Frame mounting holes
5Shoulder bolt
6End screw
Figure 1. Passenger Footrest: FLHX, FLHXS, FLTRX, FLTRXS, FLHRXS