Headlamp High Beam

See Figure 1. The headlamp high beam indicator lamp (2) is lit when the high beam or flash to pass switch is activated. Refer to Table 1.

Neutral

See Figure 1. The neutral indicator lamp (3) is lit when the transmission is in neutral. Refer to Table 1.

Oil Pressure

NOTICE

If the oil pressure indicator lamp remains lit, always check the oil supply first. If the oil supply is normal and the lamp is still lit, stop the engine at once and do not ride further until the trouble is located and the necessary repairs are made. Failure to do so may result in engine damage. (00157a)

See Figure 1. The oil pressure indicator lamp (4) is lit when sufficient oil is not circulating through the engine. Refer to Table 1.

The lamp is lit when the ignition is turned on before starting the engine. With engine running, the lamp is off when engine speed is above idle.

Several conditions can cause the oil indicator lamp to illuminate. See Troubleshooting.

Low oil level. Stop engine immediately. Add oil.
Diluted oil. Change oil as soon as possible.
Incorrect oil for the operating temperature. Change oil as soon as possible.

Turn Signals

See Figure 1. The turn signal indicators (1, 5) flash when a turn signal is activated. When the 4-way hazard flashers are operating, both turn indicators flash simultaneously. Refer to Table 1.

1	Left turn
2	High beam
3	Neutral
4	Oil
5	Right turn

Figure 1. Indicator Lamps

Table 1. Indicator Bar Indicator Lamps

ICON	NAME	FUNCTION
	Left turn	Flashes when turn signal switch is activated for a left turn. Push left turn signal switch to cancel.
	High beam	Illuminates when high beams are on. Press the low beam switch to switch to low beam.
	Neutral	Illuminates when transmission is in neutral.
	Oil pressure	If indicator remains lit, stop engine and check oil level.
	Right turn	Flashes when turn signal switch is activated for a right turn. Push right turn signal switch to cancel.