1. If necessary, remove the speed screen. See Care and Cleaning → Speed Screen.
2. See Figure 1. Loosen horizontal adjustment fastener (2). Tilt headlamp left or right to direct light beam straight ahead.
3. Tighten horizontal adjustment fastener to 40.7–47.5 N·m (30–35 ft-lbs).
NOTE
The vertical adjustment fastener (1) may be more easily accessed from the rear of the panel.
4. Loosen vertical adjustment fastener. Tilt headlamp up or down in relationship to the horizontal line from the headlamp alignment inspection.
5. Tighten vertical adjustment fastener to 47.5–61 N·m (35–45 ft-lbs).
6. If removed, install the speed screen. See Care and Cleaning → Speed Screen.
1Vertical fastener
2Horizontal fastener
Figure 1. Headlamp Adjustment