If it is necessary when washing and detailing the motorcycle, remove the chin spoiler.
Removal
  1. See Figure 1. Remove the two lower fasteners (1) from the chin spoiler.
  2. Pull the chin spoiler forward off the two mounting studs (2).
Installation
1. See Figure 1. Align the two mounting studs (2) to the two rubber grommets on the chin spoiler.
2. Press the spoiler into place.
3. Install the two fasteners (1). Tight to 5.7–6.7 N·m (50–60 in-lbs).
1Fastener
2Mounting stud
Figure 1. Chin Spoiler