1. | See Figure 1. Remove two screws to release lens from lamp housing. | |
2. | Push bulb in and rotate counterclockwise to remove bulb from socket. | |
3. | Inspect condition of electrical contacts in socket. If necessary, clean with a small wire brush and electrical contact cleaner. | |
4. | Apply ELECTRICAL CONTACT LUBRICANT to contacts in socket and at bottom of new bulb. | |
5. | Align index pins on new bulb with pin guides in bulb socket. Push bulb in and turn clockwise to lock in place. | |
6. | Seat lens in lamp and install two screws. | |
| ![](/sip/blaise/resources/artwork/publication/icon-warning.png) WARNING Be sure that all lights and switches operate properly before operating motorcycle. Low visibility of rider can result in death or serious injury. (00316a) |
7. | Test lamp operation. | |
Figure 1. Turn Signal Lamp Assembly: Flat Lens Style