| 1. | See Maintenance and Lubrication → Transmission Lubricant → Transmission Filler Plug. Remove transmission filler plug/dipstick. | |
NOTICE When draining or adding lubricant, do not allow dirt, debris or other contaminants to enter the engine. (00198a)  WARNINGBe sure that no lubricants or fluids get on tires, wheels or brakes when changing fluid. Traction can be adversely affected, which could result in loss of control of the motorcycle and death or serious injury. (00047d) | ||
| 2. | See Figure 1. Remove transmission drain plug. Drain lubricant into a suitable container. | |
| 3. | Clean and inspect drain plug and O-ring. | |
NOTICE Do not over-tighten filler or drain plug. Doing so could result in a lubricant leak. (00200b) | ||
| 4. | Install drain plug with O-ring. Tighten to 19–28.5 N·m (14–21 ft-lbs). Do not over-tighten. | |
| 5. | Fill the transmission with 0.83 L (28 fl oz) of recommended Harley-Davidson lubricant. Refer to Maintenance and Lubrication → Transmission Lubricant → Transmission Lubricant. | |
| 6. | Check lubricant level and add enough lubricant to bring the level between the A(dd) and F(ull) marks. See Maintenance and Lubrication → Transmission Lubricant. | |
| 7. | Install filler plug/dipstick. Tighten to 2.8–8.5 N·m (25–75 in-lbs). |
Figure 1. Transmission Drain Plug (Bottom View)