Removal
WARNING
After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b)
  1. See Figure 1 and Figure 2. Remove the thumbscrew (1) and the mounting nuts (4).
  2. Remove the passenger pillion (2, 7).
  3. Slide the seat (5, 6 and 8) back to slide the seat mounting tongue out of the frame channel. Remove the seat.
Installation
  1. See Figure 1. Insert tongue at front of seat into the channel in the frame.
  2. Install seat mounting nuts through holes in grab strap (3) and thread into mounting holes.
  3. Slide slots on passenger seat (2, 7) on to seat mounting nuts.
  4. Install thumbscrew (1) and tighten.
  5. Tighten seat mounting nuts (4).
1Thumbscrew
2Pillion (FLSTC/FLSTF)
3Grab strap (FLSTC/FLSTF)
4Seat mounting nut (2)
5Seat (FLSTC/FLSTF)
6Seat (FLSTN)
7Pillion (FLSTN)
8Seat (FLSTFB)
Figure 1. Seat: FLSTN/C/F/FB Models
Figure 2. Seat Mounting Stud