See Figure 1. The engine check lamp is located along the bottom of the speedometer face. Its purpose is to indicate whether the engine/engine management system is operating normally. The engine lamp color is amber.

The engine lamp normally comes on when the ignition is first turned on and remains on for approximately 4 seconds, as the engine management system runs a series of self-diagnostics.

If the engine lamp comes on at any other time, see a Harley-Davidson dealer.

See Figure 1. The low fuel lamp is located in the speedometer face, lower center by check engine lamp. The low fuel lamp illuminates to indicate that you have approximately 3.8 L (1.0 USgal)of gasoline left in the tank. The low fuel lamp color is amber.

See Figure 1. The red battery charging lamp indicates either overcharging or undercharging of the battery. Refer to Maintenance and Lubrication → Battery: General.

See Figure 1. Cruise control equipped models feature two additional indicator lamps.

See Figure 1. The sixth gear lamp on the speedometer face indicates when the transmission is in sixth gear.

See Figure 1. The red security system lamp on the speedometer face indicates when the security system is armed. Refer to Hands-Free Security Module → HARLEY-DAVIDSON SMART SECURITY SYSTEM.

See Figure 1. On ABS equipped models, the amber ABS indicator lamp begins to flash at key ON to indicate that the system is operational. It continues to flash until motorcycle speed exceeds 5 km/h (3 mph). Continuous illumination of the lamp will only occur when ABS detects that the system is malfunctioning. In the diagnostic mode, the lamp will also illuminate to indicate the presence of diagnostic trouble codes (DTCs). See a Harley-Davidson dealer for service.