It is possible to arm the security system without enabling the motion detector for one ignition cycle. This allows the vehicle to be picked up and moved in an armed state. The motorcycle cannot be turned on or started while in transport mode until the fob is present.
To Enter Transport Mode
  1. With the fob present, set the OFF/RUN switch to RUN.
  2. Set the OFF/RUN switch to OFF.
  3. Simultaneously press both the left and the right turn signal switches. This must be done within five seconds of turning the OFF/RUN switch to OFF.
  4. The turn signals flash once, then flash three times to indicate that the system is armed in transport mode.
To Exit Transport Mode
With the fob present, set the OFF/RUN switch to RUN to disarm the system and exit transport mode.