1. | Ensure the fob is present. | |
2. | Remove top cover. See Service Procedures → Top Cover. | |
3. | Place OFF/RUN switch in RUN position. | |
4. | See Figure 1. Disconnect Telematic Control Unit (TCU). | |
5. | Place OFF/RUN switch in OFF position. | |
6. | Remove seat. See Operation → Seat. | |
7. | Leave OFF/RUN switch in OFF position for at least five minutes before main fuse is removed. | |
8. | See Figure 2. Remove main fuse. |
1. | Connect TCU connector. | |
2. | Install main fuse. | |
3. | Install top cover. |
1 | TCU |
2 | TCU connector |
1 | Fuse box |
2 | Main fuse |
3 | Cover |