Headlamp Switch
Cruise control ON
See Figure 1. Press the cruise ON button (4) to turn ON cruise control. The cruise icon in the IM turns amber.
Cruise control OFF
See Figure 1. Press the cruise OFF button (4) to turn OFF cruise control. The cruise icon in the IM turns off.
Cruise control set/decrease speed
See Figure 1. When the motorcycle reaches your intended speed, press the SET/- switch (1) to set the cruise speed. The amber cruise icon in the IM turns green.
Tapping the SET/- switch decreases speed by 1.6 km/h (1 mph). Holding the SET/- switch down gradually decreases cruise speed.
Cruise control resume/increase speed
See Figure 1. If cruise has been disengaged yet the cruise indicator is amber, pressing the RES/+ switch (2) resumes cruise. The icon in the IM glows green. The motorcycle automatically resumes cruise at the set speed.
Tapping the RES/+ switch up increases speed by 1.6 km/h (1 mph). Holding up the RES/+ switch gradually increases cruise speed.
Trip
See Figure 1. The trip button (5) activates the trip odometers. The trip button also is used to scroll through the additional screens of the odometer display. With the ignition off, the trip button can activate time or odometer displays.
Menu
See Figure 1. Press the Menu button (7) to access IM menu selections.
Navigate left
See Figure 1. Press the navigate left button (13) to scroll left on the IM.
Navigate right
See Figure 1. Press the navigate right button (8) to scroll right on the IM.
Navigate up
See Figure 1. Press the navigate up button (6) to scroll up on the IM.
Navigate down
See Figure 1. Press the navigate down button (10) to scroll down on the IM.
Turn signals/cancel
Horn
See Figure 1. The horn is operated by pressing the horn button (12). The horn can be activated for up to 10 seconds at a time. If the horn button is held for a longer period, the horn automatically deactivates.
OK/enter
See Figure 1. Push the OK/enter button (14) to approve or enter a section in the IM.
1Cruise set/resume
2Headlamp switch
3Left hand control module
4Cruise control
5Trip/odometer
6Navigate up
7Menu
8Navigate right
9Home
10Navigate down
11Turn signal/cancel
12Horn
13Navigate left
14OK/enter
Figure 1. Left Hand Control Module
Table 1. Left Hand Control Switches/Buttons
SWITCH/
BUTTON
NAME
FUNCTION
SET/-
Cruise control set/
decrease speed
Press switch to set cruise control speed.
RES/+
Cruise control resume/
increase speed
Press switch to resume to a set cruise control speed.
Flash to pass
Press and release to flash the high beam. In Accessory position on ignition switch (ACC), press to activate the headlamp.
Low beam
Press the switch to switch the headlamp to low beam.
High beam
Press the switch to switch the headlamp to high beam.
Cruise control ON
Press the button to turn cruise control ON.
Trip
Press the button to alternate odometer displays.
Cruise control OFF
Press the button to turn cruise control OFF.
Navigate left
Press the button to go left on IM screen.
Navigate up
Press the button to go up on IM screen.
Menu
Press the button to navigate through menus in the IM.
Navigate right
Press the button to go right on IM screen.
Home
Press the button to return the speedometer/odometer screen.
Navigate down
Press the button to go right on IM screen.
Turn signal
  • Left turn signal
  • Right turn signal
  • Manual cancel
Press the switch to signal.
Horn
Press the button to sound horn.