It is possible to arm the security system without enabling the motion detector for one ignition cycle. The motorcycle can be moved in an armed state. The motorcycle cannot be turned on or started while in transport mode until the fob is present.
To Enter Transport Mode
  1. With security fob present, set the OFF/RUN switch to RUN.
  2. Simultaneously press both the left turn signal switch and the flash to pass button for 10 seconds.
  3. While still holding the switch/button, turn ignition OFF.
  4. The Instrument Module (IM) will display transport mode activated.
NOTE
Failing to put the vehicle into transportation mode will drain the 12 V battery.
To Exit Transport Mode
With the security fob present, set the OFF/RUN switch to RUN to disarm the system and exit transport mode.