Two-up Seat
See Figure 1. The helmet locks are located on the left and right side of the motorcycle under the seat.
| 1. | Lift seat. Refer to Operation → Seat. | |
| 2. | Insert D-ring from helmet over open hook. | |
| 3. | Latch and lock seat to secure helmet. Refer to Operation → Seat. |
NOTE
Do not operate the motorcycle with a helmet in the helmet lock.
Figure 1. Helmet Lock (Two-up seat)
Solo Seat
See Figure 2. The helmet locks are located on the left and right side of the motorcycle under the fender cowl (2).
| 1. | Lift the fender cowl. a. Insert key into key cylinder (1) and turn clockwise. b. Lift fender cowl (2) from rear and remove. | |
| 2. | Route included strap through helmet D ring and secure strap to hook (4). | |
| 3. | Latch and lock fender cowl to secure helmet. a. Align tab (3) with slot in fender. b. Align helmet straps with spaces on fender cowl sides. c. Lower rear of fender cowl until post (5) engages latch (6). |
NOTE
Do not operate the motorcycle with a helmet in the helmet lock.
| 1 | Key cylinder |
| 2 | Fender cowl |
| 3 | Tab |
| 4 | Hook |
| 5 | Post |
| 6 | Latch |
Figure 2. Helmet Lock (Solo seat)