Assigning Fob
See Figure 1. Key fobs are electronically assigned to the security system by a LiveWire dealer. Only two fobs can be assigned at any one time.
Purchase replacement fobs from a LiveWire dealer. The fobs can only be assigned to an individual motorcycle by a trained LiveWire technician.
Figure 1. Security System Fob
NOTE
Fob Battery
WARNING
CONTAINS BUTTON OR COIN CELL BATTERY. KEEP OUT OF REACH OF CHILDREN.
Ingestion can result in death or serious injury. Choking, chemical burns and perforation of soft tissue may result. Severe burns can occur within 2 hours of ingestion or placement in any part of the body. Seek medical attention immediately. (13105b)
WARNING
Contains button or coin cell battery. Hazardous if swallowed, can result in death or serious injury. (13807a)
Replace the fob battery every year.
NOTE
  • The reusable label found on the fob packaging lists the serial number of the fob. For reference, affix the label to a blank "NOTES" page in this Owner's Manual.
  • See Figure 2. The serial number of the fob is also found on the inside of the fob.
  1. See Figure 2. To open the fob, turn a thin blade in the slot (1).
  2. Identify size of battery in fob.
  3. Remove the battery (2) and discard in accordance with local regulations.
  4. Install a new battery of same size as battery that was removed, with the negative side up.
  5. Align the two halves of the fob. Snap the halves together.
1Thumbnail slot
2Battery (CR1632 early models) (CR2032 late models)
3Latch
Figure 2. Replace Fob Battery
Riding with a Fob
Riding without a Fob
If the motorcycle is ridden without the fob in acceptable proximity, the Instrument Module (IM) displays the PIN entry screen. To restart a motorcycle without a fob, disarm the security system with the PIN.