The Navigation features on the GTS system are available in select regions. To prevent distraction while riding, plan your Rides and select destinations before riding the motorcycle.

The navigation system can route to address entries, phone book contacts, point of interest (POI) destinations in the navigation database or by manually selecting locations on the touchscreen map. Domestic (DOM) market vehicles can also do the same plus import Rides and destinations from Ride Planner (https://maps.harley-davidson.com) and the H-D App.

NOTE

There will be a slight delay after the vehicle or the radio has been powered on while the navigation system initializes. Wait until the system has finished the initialization process before using the navigation system.
There may be some limitations when operating the navigation system in buildings or underground structures (such as tunnels or underground parking).

One Box Search (OBS)

One Box Search destination entry supports the standard United States and Canadian state/province/territory two-letter abbreviations. User can enter street/city and state/state abbreviations.

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Select: Search.
4.	See Figure 1. Input in search field: a. Latitude/Longitude (Example: 40.44611, -79.98222 or 40° 26′ 46″ N 79° 58′ 56″ W or 40.446° N 79.982° W) b. Intersections/Cross Roads (Example: 37th Street and Juneau Avenue. Valid symbols to separate streets: and, &, @, at) c. Street Address (Example: 3700 W. Juneau Avenue Milwaukee WI 53208) d. Phone Number POI search only (Example: 4143434056 and result is Harley-Davidson customer care representative) e. POI search (Example: Gas Stations and result is Sunoco, Mobile, Shell, etc.)

Figure 1. Input Address

Map Compass Setting

NOTE

The motorcycle must be in motion to determine the current heading. If the current heading is not known, the full-size compass displays question marks.

The compass is displayed in the upper right corner of the map. The heading indicator is displayed in the center of the map. The icons operate differently according to the map orientation setting (north up or heading up).

The compass needle is divided into two sections. The red section is the part of the needle that points north. And the white section is the part of the needle that points south.

North Up: The map is always orientated with north up (top of screen). And the compass is always pointed up (north).

Heading Up: The heading directional display will now operate as a traditional compass with the top representing the direction ahead and the rotating needle shall point to the direction of North.

3D or 3 Dimensional: This is the same as Heading Up but the mapping has gone from a two-dimensional plane to three-dimensional points.

NOTE

While on other screens, the system can display current heading in either the left or right data wing. Press data wing and select Heading.

Full-Size Compass (equipped without Navigation)

For regions that do not support navigation features on the radio, selecting Navigation displays a full-size compass.

Navigate: Home > Navigation.